Metal Braces in or near Opa-Locka
Searching for Metal Braces in Opa-Locka, FL? Dr. Carmen Briceño-Crespi of Lakes Ortho is a leading provider of Invisalign and braces in the South Florida area. When you are ready to get the smile you always wanted call us today! Orthodontic Braces is a something that a lot of many people get to assist with adjusting their teeth. Braces can perform a lot more than boost your smile, however you you have got to take time to clean them properly. There are several tips that you should know about when taking care of your braces; like brushing and flossing.
You should carefully sanitize your braces plus your teeth to make sure that there is not any plaque build-up. To do this, you will need to floss and brush your teeth and braces correctly. There are a number of steps that you should take when doing this. First is to get your braces ready for brushing. To achieve this, you should get rid of the elastics around the braces as well as the other removable parts. These parts can be broken if you brush and will create issues.
You must then sanatize your braces using your brush. You have to hold the toothbrush at a 45-degree angle to be sure that you wash about the wire and pins. You need to brush each wire from top to bottom and take your time to ensure that you remove all the debris and plaque. It is recommended that you begin with the braces on your upper teeth and then the lower teeth. After you have cleansed the braces, you will need to brush your teeth. Each tooth ought to be washed on it’s on in a circular motion. You should be cautious with the level of pressure you use when burshing your teeth and brush both inside and outside top of the teeth.
Once daily, you should floss your teeth. Your orthodontists will be able to explain to you the best method to floss around the braces which you have. You need to keep to these instructions and use a flossing product that is created for use with braces. Once you finish flossing, you should rinse with some water or mouthwash. You need to then inspect your braces and teeth in the mirror to look for spots that you could have missed. If you see any, you have to brush that area again to ensure that the braces are properly maintained.
Where to Get Metal Braces in Opa-Locka, Florida?
In the time that you have your braces, you will need to regularly visit your orthodontist. This will help you keep your braces and ensure that are set correctly. Scheduled changes is going to be done throughout the time you may have braces and you will experience a little tightness at these periods.
These visits may also give your orthodontist the chance to make certain your braces remain in great condition. If you notice anything odd in the braces, you have to inform the orthodontist when you see them. Issues with your braces can often be repaired fairly quickly should they be caught early and they will not result in pain. There are a variety of tips that you have to learn about when taking care of your braces. Cleaning your braces and teeth correctly is essential and you need to make time to do this correctly. You also need to be open with the orthodontist about any issues that you have. If you would like additional information in regards to the Opa-Locka orthodontic services offered by www.Lakes-Ortho.Com check out at our blog…
Top Article Related to Metal Braces in Opa-Locka
Looking For Braces In South Florida?
Well, you are lucky because Miami Lakes is the hometown of South Florida’s premier orthodontic specialist, Dr. Carmen Briceño [...]
Why Invisalign is the Best Choice
A lot has happened throughout the last two decades when it comes to the orthodontic dentistry. Subtler tooth correction [...]
Pros and Cons of Invisalign and Braces
When deciding what type of corrective hardware is right for you or your child, you will likely have many [...]
How Do Braces Get Placed On My Teeth?
Do braces hurt to put on my teeth?
This topic may seem a bit elementary to many at first glance, but I get these questions all the time at my orthodontic practice. Over the years we have performed over 20,000 orthodontic treatments and although everyone’s case is unique we get a lot of very similar fears, concerns, and questions. Most people have seen braces on someone they know before they come to our office, but they really don’t understand how they work or how they get on the teeth to begin with. Patients will look at the model teeth with braces on them on top of the consultation table and ask me, “How is it that braces actually work? How do they get on my teeth? Do you screw them on?”
How do braces work?
Braces have come a very long way since they were invented in 1728. There have been several advancements in orthodontics that have made braces smaller, less noticeable, more comfortable and now they even come in a variety of materials and colors. The way most modern braces work today is that an orthodontic specialist (a dental specialist who is an expert in moving teeth and correcting bites) takes measurements and X-rays to determine the exact need of the patient and develops a treatment plan for the patient. Based on this plan the orthodontist then prepares the surface of the teeth (basically cleans the teeth with a highspeed toothbrush) and then places the brackets (braces) on the teeth by cementing (dental adhesive) them on the teeth and then curing them with a special light in order to bond them together. There is no screwing and most of the time there are no metal rings that have to be fit around the teeth unless there are special appliances that need to be anchored to the teeth. An archwire (typically a metal wire) is then tied to the braces to connect them together and begin the process of applying pressure to the teeth in order to get them to move in the intended direction. After the braces are put on teeth in the initial appointment then the braces and wires will be monitored and adjusted by the orthodontist periodically (typically every 4-6 weeks) until the teeth and bite are correct. The entire process typically ranges from 12-24 months, but this can change based on the needs of the patient and the difficulty of the case. After braces, the patients’ teeth and the bite should be in their ideal location and retainers will be made to fit the final position of the teeth.
Do braces hurt to put on my teeth?
Putting braces on your teeth does not hurt. As mentioned above the braces are not screwed onto the teeth as they are glued/cemented to the teeth which requires very little pressure and is typically not painful. The pain or soreness that some patients feel does not occur during the process of putting on the braces. The discomfort that some patients describe is caused by the movement of the teeth that occurs after the braces are placed on the teeth. The pain is typically felt for a few days and then the patient becomes accustomed to the braces. There are plenty of tricks that patients can use to minimize the pain felt on the initial 2-3 day period of soreness such as a braces friendly diet, taking an aspirin and/or using plenty of orthodontic wax on the braces. Braces take a little getting used to but the benefit of having a beautiful smile for a lifetime far outweighs the initial discomfort.